Past Patreon Releases

Patreon Rewards – January 2022

$20.00

These models were originally made for my Patrons on Patreon.
Please consider supporting me for a monthly dose of a great printable scenery.

 

 

 

 

 

 

Buy now

I'm pleased to present you the January Rewards - The Floating Islands Set vol. 2

This set can be used as a expansion for my the most popular set, The Floating Islands Set vol. 1, as well as independent product.

This set will be useful even for people not interested in flying islands - there’s a lot of independent scatter terrain and elven architecture in this bundle.
Also, top parts of islands can be glued or attached using magnets. If you decide to not using glue, you can use these parts as hills and other non-floating scenery.

The islands need to stand on 1 inch rods (1” in diameter and 150mm/200mm/250mm+ tall) that can be printed or purchased (for example, on Amazon. Unfortunately, acrylic clear rods can be quite expensive. I suggest to check out hydraulic products, you can find some interesting 1” rods/pipes).

In the files you will find printable rods with a height of 15cm and 20cm.

All the islands are printed in two parts (+base) and can optionally use magnets.

The maximum size of the magnets that can be used for the islands is 15mm (diameter) x 3mm (height). If you are using lower magnets, I suggest you use some kind of putty or thick glue to fill the slot.

The upper parts of the islands have been designed to be an interesting element of the scenery even when lying flat on the table. In this way you can get interesting hills with columns, crystal formations or a shrine, for example.

The set also includes separate lower parts of the islands without any holes - they can be used as hills and rock formations.

The islands should stand firmly on the table thanks to the printable base decorated with crystals.

Files included in this set:

  • 1” rods (150 and 200mm)

     

Independent models:

  • Elven Pillar (2 variants)
  • Elven Shrine
  • Elven Stone (2 variants)
  • Elven Structures (7 variants)
  • Elven Tower
  • Elven Tower - Overgrown variant
  • Elven Tower - Overgrown and ruined variant
  • Hill with Crystals (2 variants)
  • The Orb of Illumination

Floating Island Type #1

  • Floating Island #1 - Bottom
  • Floating Island #1 Top - Crystals
  • Floating Island #1 - Top - Elven Stone
  • Floating Island #1 - Top - Elven Structure #1
  • Floating Island #1 - Top - Elven Structure #2
  • Floating Island - Base - 1” hole

Floating Island Type #2

  • Floating Island #2 - Bottom
  • Floating Island #2 Top - Crystals
  • Floating Island #2 - Top - Elven Shrine
  • Floating Island #2 - Top - Elven Tower
  • Floating Island #2 - Top - The Orb of Illumination
  • Floating Island #2 - Top - Triple Elven Columns
  • Floating Island - Base - 1” hole

Models from this set are made for FDM printing and do not require using any supports.

NOTE: This product does not contain any physical models - Contains only digital products in the form of STL files for printing on your own 3D printer.

The miniatures presented in the pictures (dwarf, female druid and warrior) are made by Duncan "Shadow" Louca and are shown only for the scale. They are used with the knowledge and consent of the author. They are not included in the presented product.

 

 

These files are licensed for personal use.
You do not have permission to sell the prints or distribute the files.